DLHR-F50D-E1BD-I-NAV8计量标准双向125pa压力传感器详细介绍

此价格并非售价，有需求请联系13724211742郭生DLHR-F50D-E1BD-I-NAV8

The DLHR Series Mini Digital Output Pressure Sensor is based on All Sensors&＃39; CoBeam2 TM

Technology. This reduces package stress susceptibility, resulting in

improved overall long term stability and vastly improves the b

sensitivity.

The digital interface option eases integration of the sensors into a

wide range of process control and measurement systems, allowing direct

connection to serial communications channels. For battery-powered

systems, the sensors can entire very low-power modes between readings to

minimize load on the power supply.

These calibrated and compensated sensors provide accurate, stable

output over a wide temperature range. This seris is intended for use

with non-corrosive, non-iconic working fluids such as air, dry gases,

and the like. A protective paralyne coating is optionally available for

moisture/harsh media protection.

DLHR系列微型数字输出压力传感器基于All Sensors的CoBeam2 TM技术。 这降低了封装应力敏感性，从而改善了总体长期稳定性，并大大提高了位置灵敏度。

数字接口选项简化了将传感器集成到各种过程控制和测量系统中的过程，从而可以直接连接到串行通信通道。 对于电池供电的系统，传感器可以在两次读数之间建立非常低功耗的模式，以程度地减少电源上的负载。

这些经过校准和补偿的传感器可在宽温度范围内提供准确，稳定的输出。 该系列旨在与非腐蚀性，非图标性工作流体（例如空气，干燥气体等）一起使用。 可以选择使用保护性的聚对二甲苯涂层来保护水分/苛刻的介质。

DLHR-L02D-E1BD-C-NAV8

DLHR-L02G-E1BD-C-NAV8

DLHR-L60G-E1BD-C-NAV8

DLHR-L05D-E1BD-C-NAV8

DLHR-L60D-E1BD-C-NAV8

DLHR-L30D-E1BD-C-NAV8

DLHR-L10D-E1BD-C-NAV8

DLHR-L10G-E1BD-C-NAV8

DLHR-L01G-E1BD-C-NAV8

DLHR-L30G-E1BD-C-NAV8

DLHR-L05G-E1BD-C-NAV8

DLHR-F50D-E1BD-C-NAV8

DLHR-L01D-E1BD-C-NAV8

DLHR-F50G-E1BD-C-NAV8

DLHR-L05D-E1BD-I-NAV8

DLHR-L01D-E1BD-I-NAV8

DLHR-L10D-E1BD-I-NAV8

DLHR-F50D-E1BD-I-NAV8

DLHR-L60D-E1BD-I-NAV8

DLHR-L02D-E1BD-I-NAV8

DLHR-L30D-E1BD-I-NAV8